CHAINSAW CHAIN

 

72 LINKS 3/8 .058

CENTRI-LUBE

SELF-OILING DRIVE LINK CENTRI-LUBE

 

Chain has a specialy designed channel in each drive link that picks up oil from the bar and distributes it to the rivits reducing the friction and increasing the saw chain life CENTRI-LUBE design assures long saw chain life by heat reduction Hard crome cutters that stay sharp longer Chain saw cutters are precision ground on a water cooled surface grinder Chainsaw is manufactured from American steel. in an ISO 9001:2000 factory

CHAIN TO FIT

20 INCH BAR

PITCH 3/8

GAUGE .058

DRIVE LINKS 72

SEMI CHISEL

 

Semi Chisel chain is recommended for Dirty , Dryer type woods and is a good general purpose chain

 

FITS HUSQVARNA MODELS

357XP , 455R , 460 , 262 , 359 , 262 , 365 , 570 , 372XP , 575XP , 385XP , 390XP ,

395XP , 3120XP , 55 RANCHER , 61 , 65 , 66 , 70 , 77 , 180 , 181 , 266 , 272 , 288XP ,

371XP , 380 , 394 , 480 , 1100 , 2100 , 2100XP , 185 , 281 , 285 , 288 , 372 , 385 ,

480 , 3120

 

JOHNSERED MODELS

CS2159 , CS2165 , CS2171 , CS2186 , 2095 , 2165 , 2171 , 635 , 670 , 2065 , 2071 ,

2077 , 2083 , 2094 , 625 , 630 , 2163 ,CS2186 , 635 , 2083 , 2094 ,CS2159C

 

PARTNER MODELS

R16 , 20 , 30 , 40 , 50 , 55 , P65 , 70 , 85 , 100 , R420 , 421 , 435 , 440 , 650 , 7000

Makita DCS7301

 

PLEASE NOTE !! 

 I RECOMMEND THAT YOU CHECK YOUR CHAIN SIZE BEFORE ORDERING TO MAKE SURE IT'S THE RIGHT SIZE MEASURE THE BAR LENGTH FROM WHERE THE BAR COMES OUT OF THE SAW TO THE TIP OF THE BAR AND COUNT THE DRIVE LINKS ON THE CHAIN THESE ARE THE LINKS ON THE INSIDE OF THE CHAIN THAT PROTRUDE DOWN REFER TO PICTURES OR CHECK YOU OWNERS MANUAL IF THE BAR SIZE AND THE LINK COUNT MATCH THEN THE CHAIN WILL FIT IF YOU ARE UNSURE OR NEED A DIFFERENT CHAIN PLEASE EMAIL ME BEFORE ORDERING.