Tubes

Replacement pneumatic tubes for ride on mower tyres, used when a tube has perforated, cracked with age, or lost its ability to hold air even after the tyre itself has been checked. These sit inside the tyre and are sized to match the wheel, not the mower brand, so the key numbers are on the tube itself.

Tubes are specified by tyre size (for example 11 x 4.00 x 5 or 20 x 8.00 x 8) and by valve stem type, either straight stem or bent stem, with some fitting a TR13 or TR87 valve. Check the size moulded on your old tyre or tube and the angle of the valve stem before ordering, since a tube with the wrong stem angle won't sit properly in the rim.

  • Straight stem valve tubes
  • Bent stem valve tubes
  • A range of sizes from small front tyres to larger rear tyres

Frequently asked questions

How do I know what size tube I need?

Check the size printed on the sidewall of your current tyre or tube, which is usually given as width by diameter by rim size, such as 11 x 4.00 x 5.

What's the difference between a straight stem and bent stem valve?

It refers to the angle the valve stem sits at on the tube. The correct angle depends on your wheel design, so match it to the stem angle on your old tube.

Can I use a tube with a different valve type like TR13 or TR87?

These refer to the specific valve stem fitting, and you should match the valve type to what your wheel rim is designed for rather than mixing types.